My install was for a Strat build with Fender Ultra Hot Noiseless in the neck and middle and Seymour Duncan Little 59 humbucker bridge. Tried many wiring combinations but the Little 59 was simply too bright. I used the Obsidian wire blender control plate with auto split for position 2, but even the bridge alone was too bright and gutless. Could be the 500k pot? I put it in SSS mode and still the same. Ended up putting the Noiseless hot in the bridge too and tone is as expected.
Hi Drew,
Thanks for your feedback. There are a couple of things to try
- Set the 'Mode ' switch to the SSS / 250k setting. This will tame the highs of the bridge pickup
- Set the bridge pickup further away from the strings. This will reduce high frequencies.
- // OR set the bridge pickup closer to the strings for greater overall output.
If the above does not help, let us know and we will see if there could be something esle causing output issues with the bridge pickup.
I bought for my 2016 Epiphone LP Studio. Reamed out the Holes for the Pots and I installed in less than 30 minutes. I suggest ,if you do not have the correct knobs, buy them with this wiring kit. NO Problems at all. sounds Great.
Nice quality pickguard, but had to sand it quite a lot for it to fit on my MIM Player Tele. Without sanding it would sit over top of the control plate.
Other than that though, awesome product - good price. Obsidian for the win
I put this Obsidian MK II in my Epi LP Custom. I did have to enlarge the holes for for the pots as they didn't fit without modification as (obsidian directions said). The other issue was the output jack was grounding out. This was a simple correction, simply had to rotate jack 180 degrees. Now the good (great!l the rest of the install using Seymour Duncan pearly gates was really straight forward. This guitar nows sound better than my 3 others which cost much more individually. I will definitely purchase again.
I installed the device in. Squire Strat. The install went as expected. The only modification to the guitar was to increase the pot holes size to 10 mm. The upgrades sound great.