The Custom 5-Way for Nashville Tele. The perfect Pro-Wired Electronics upgrade for your three pickup Telecaster®. Or, just the tool you need to add a middle pickup to your Tele®, for some quacky Strat® tones.
Best of all, these are super easy to install, and allow for unlimited solder-less pickup changes with ObsidianWire Plug, Play and Enjoy connectors.
The Custom 5-Way Harness for Nashville Tele®
Featuring a 5-way switch and built with premium selected components, for improved clarity and control, these are these are the perfect tool for adding a third pickup to your existing telecaster, or as a general upgrade over your Nashville Teles stock electronics. The 5-way switch gives you
Position 1: Bridge
Position 2: Bridge + Middle
Position 3: Middle
Position 4: Middle + Neck
Position 5: Neck
To make your tone crystal clear at lower volumes we also include an ObsidianWire Custom Spec Treble Bleed Mod. This prevents tone 'muddiness' at low volumes by allowing high frequencies to pass along a separate path to your amp, rather than being stopped short by the increasing resistance at the volume control.
We build ObsidianWire Pro-Wired Electronics using the world’s best craftsmanship and components:
- 2 x ObsidianWire Custom Select Pots (Crafted by CTS) 250k or 500k (+/-6%) (Matched to +/-2%) SOLID SHAFT
- 1 x Genuine Oak Grigsby 5-Way Switch
- 1 x Genuine Switchcraft J11 Mono Output jack
- 1 x ObsidianWire Custom Select Capacitor (NOS K42Y-2 0.047uf) or (150 Series Polyester Film 0.022uf) (Hand Tested to +/-10%)
- 1 x ObsidianWire Premium Selected Volume Mod / Treble Bleed - Improved Volume Taper & Clarity
- 1 x Pre Printed & Easy to Follow Wiring Diagram
- 1 x Endless Customer Support
ObsidianWire Pro-Wired Electronics for Telecaster, are designed to be a direct fit for American and Mexican series Fender® Nashville Telecasters with three pickups. We cannot guarantee that these will fit any other guitar.
We also know that many aftermarket control plates do not have the correct Fender spec spacing and as such will not fit our electronics. We recommend a genuine Fender plate – Part Number: 099-2058-000
At ObsidianWire we use US spec 1/4" Solid shaft controls. We recommend that you check your knobs are the correct size and replace them if necessary.
Be the first to review this product.
- At ObsidianWire we use only the absolute best components and craftsmanship. We are so confident that you will experience years of trouble free use, that we guarantee it with an industry leading, three year warranty. If you feel that your Pro-Wired Electronics are not working like they should, please contact us and we will fix or replace them as soon as possible.