Vintage MKII for Les Paul® (Select-able 50s & 60s)

✔ Solder-less Install
✔ Solder-less Pickup Changes
✔ Select-able Vintage 50's or Modern 60's Control Layout
✔ Vintage 50's smooth volume roll back for soulful cleans
✔ Modern 60's Retains Treble for Increased Clarity

Solder-less Install

All ObsidianWire Pro-Wired Electronics are super easy to install, and allow for solder-less pickup changes with ObsidianWire Plug, Play & Enjoy connectors.

Vintage 50's Vs Modern 60's LP Wiring..... Why Choose?

Auto Select between them. With the flick of a switch

The all new ObsidianWire Vintage MKII for Les Paul® combines the super popular Traditional Vintage 50's & Traditional Vintage 60's wiring for Les Paul® in to one product. You can now choose between the vintage roll back of the traditional vintage 50's harness, and superior clarity of the more modern 60's wiring with the flick of the switch. 

Even better, you get a switch for each pickup, so if you want to run a 50's setup on the neck pickup, and a 60s setup for the bridge pickup, YOU CAN.

Vintage 50's Wiring

Allow for some treble roll off when you roll back your volume control for an easy bridge between perfect warm cleans and searing leads.

The 50's wiring mod is a super popular Les Paul wiring upgrade that reverts your stock LP wiring back to the glory days, and the beginning of the Vintage Les Paul. This is our most popular and personal favorite Les Paul wiring.

Modern 60's Wiring 

Prevent treble loss when you roll back the volume for greater clarity and cut through at reduced volume levels.

The ObsidianWire Modern 60s wiring is made for clarity and cut through with an improved circuit that will help you retain treble at all volume levels.

 The Build: 

We have a small team of people that love crafting Pro-Wired Electronics and we take pride in producing the absolutes best. We use custom specified parts, perfected techniques, and hand test to ensure that your harness will be an upgrade for your guitar, from factory model to custom shop.

World’s Best Craftsmanship and Components

 ObsidianWire Custom Select 500k Pots (Crafted by CTS) (+/-10%) US Spec Split Shaft / 24 Spline

Obsidian Select Pro-Wired Toggle Switch

Obsidian Select Capacitors (150 Series Polyester Film 0.022uf) (+/-5%)

Genuine Switchcraft J11 Mono Output jack

Pre Printed & Easy to Follow Wiring Diagram

Endless Customer Support

Install Info:

Compatibility:

Fits Gibson® & Epiphone® Les Paul® ONLY - See Notes Below

Always Check Hole Spacing against diagram HERE.

All ObsidianWire Pro-Wired Electronics for Les Paul require:

✔ US spec 24 spline knobs FIND HERE
✔ 3/8" (9.5mm) mounting holes

Model Compatibility 

Gibson® Les Paul® - Direct Fit // Right Hand Guitars Only

Epiphone® Les Paul® - Check Hole Spacing against diagram HERE  - You will also need to widen the control holes out to 10mm and get new US Spec, 24 spline knobs to fit the higher grade electronics. // Right Hand Guitars Only

Three Pickup Les Paul - DOES NOT FIT

Les Paul Copies - DOES NOT FIT

SG - DOES NOT FIT

PRS - DOES NOT FIT

Tele Deluxe - DOES NOT FIT

Left Hand Guitars - DOES NOT FIT

Any Other Guitar - DOES NOT FIT

Product Support Pages

Install Help