• Top down view of a Telecaster chrome loaded control plate with chrome knobs. on a clear cut white background
  • Bottom side view of a Telecaster loaded control plate with chrome knobs and an ObsidianWire telecaster wiring harness, showing the pots, switches and solderless connector. Set on a clear cut white background
  • A hand held pre-wired Telecaster control plate with chrome control plate, chrome knobs and a black switch tip.
  • an ObsidianWire HH & HS Custom Universal Tele Wiring Harness is shown on a clear cut white background. The image is zoomed in in the small components of the harness.
1 5

Custom Universal for Tele® Loaded Control Plate CHROME

US$159.00
US$159.00
Versand wird beim Checkout berechnet

Super Easy, Solder-less Install
Key Features:

  • High Quality Chrome Hardware
  • Traditional 3-Way Tele® switching
  • Built for Humbucker & P90 Loaded Telecasters
  • 4 Optimized Modes (HH, HS, SH & SS)
  • Improves clarity for humbuckers
  • Balances single coils
  • Crystal Clear Tone
  • Smoother Volume & Tone Control
  • Fits Fender® & Squier Telecaster®
  • Includes Pro-Wired Jack

weitere Infos Bilder anzeigen
Custom Universal for Tele® (Obsidian® Coil Split - Upgrade Option)
  • Beeilen Sie sich, nur noch 4 Artikel auf Lager!

SCHNELLE LIEFERUNG

5 JAHRE GARANTIE

ObsidianWire solderless install logoSuper Easy, Solder-less Install
All Obsidian® Pro-Wired™ Electronics are super easy to install, and allow for solder-less pickup changes with Obsidian® Plug, Play & Enjoy connectors. 

 

Your dream loaded Tele® control plate, complete with a set of ObsidianWire® Pro-Wired™ Electronics, and a high quality control plate and knobs.

TELECTASTER® ELECTRONICS FOR HUMBUCKER & P90 LOADED TELES®

We have created this harness especially for humbucker or P90 loaded Telecasters, and made it compatible with single coils, or single coil sized humbuckers as well. We incorporate INTELLIGENT SWITCHING which allows you to get the absolute most out of both pickups, no matter the configuration

INTELLIGENT SWITCHING

Optimized for humbuckers & single-coils When building a Telecaster with a mix of humbuckers and single coils, there is a toss-up between choosing 500k controls, to retain the life of a humbucker, or 250k controls, to balance brighter single coils.

We say 'why choose? '. So we build in Obsidian® Intelligent Switching to give you the absolute best of both your humbuckers and single coils with a wiring harness that will automatically switch between the two.

THE MODES

  • HH Tele® (Humbucker + Humbucker)
  • HS Telecaster (Humbucker Neck + Single Coil Bridge)
  • SH Telecaster (Humbucker Bridge + Single Coil Neck)
  • SS Tele® (Two Single coils / traditional Tele® mode)

CRYSTAL CLEAR TONE (Treble Bleed)

Retain clarity at lower volumes. To make your tone crystal clear at lower volumes we include an Obsidian® Custom spec treble bleed mod. This prevents tone 'muddiness' at low volumes by allowing high frequencies to pass along a separate path to your amp, rather than being stopped short by the increasing resistance at the volume control.

SMOOTH CONTROL

Even tone and volume control all the way from zero to ten. Obsidian® tone and volume controls incorporate carefully selected and custom-built components, as well as our own clever mods to smooth out the taper of your tone and volume controls, so you get a more even roll off all the way from zero to 10.

DUAL SC (COIL SPLIT) - UPGRADE OPTION

Turn your humbuckers in to single coils, and back again. To add true versatility to your guitar we build in Obsidian® Dual SC, allowing you to split each of your humbuckers to singlecoils for lower output, more dynamic tones.

Obsidian® Dual SC is built in to your volume controls using push/pull pots, so no extra mods are required to your guitar.
- Requires split coil compatible humbuckers

Top down view of a Telecaster chrome loaded control plate with chrome knobs. on a clear cut white background
Bottom side view of a Telecaster loaded control plate with chrome knobs and an ObsidianWire telecaster wiring harness, showing the pots, switches and solderless connector. Set on a clear cut white background
A hand held pre-wired Telecaster control plate with chrome control plate, chrome knobs and a black switch tip.
an ObsidianWire HH & HS Custom Universal Tele Wiring Harness is shown on a clear cut white background. The image is zoomed in in the small components of the harness.
A hand held pre-wired Telecaster control plate with chrome control plate, chrome knobs and a black switch tip.

Der Custom Universal for Tele® Loaded Control Plate CHROME

  • High Quality Chrome Hardware
  • Traditional 3-Way Tele® switching
  • Built for Humbucker & P90 Loaded Telecasters
  • 4 Optimized Modes (HH, HS, SH & SS)
  • Improves clarity for humbuckers
  • Balances single coils
  • Crystal Clear Tone
  • Smoother Volume & Tone Control
  • Fits Fender® & Squier Telecaster®
  • Includes Pro-Wired Jack

Einzelheiten

Beschreibung

ObsidianWire solderless install logoSuper Easy, Solder-less Install
All Obsidian® Pro-Wired™ Electronics are super easy to install, and allow for solder-less pickup changes with Obsidian® Plug, Play & Enjoy connectors. 

 

Your dream loaded Tele® control plate, complete with a set of ObsidianWire® Pro-Wired™ Electronics, and a high quality control plate and knobs.

TELECTASTER® ELECTRONICS FOR HUMBUCKER & P90 LOADED TELES®

We have created this harness especially for humbucker or P90 loaded Telecasters, and made it compatible with single coils, or single coil sized humbuckers as well. We incorporate INTELLIGENT SWITCHING which allows you to get the absolute most out of both pickups, no matter the configuration

INTELLIGENT SWITCHING

Optimized for humbuckers & single-coils When building a Telecaster with a mix of humbuckers and single coils, there is a toss-up between choosing 500k controls, to retain the life of a humbucker, or 250k controls, to balance brighter single coils.

We say 'why choose? '. So we build in Obsidian® Intelligent Switching to give you the absolute best of both your humbuckers and single coils with a wiring harness that will automatically switch between the two.

THE MODES

  • HH Tele® (Humbucker + Humbucker)
  • HS Telecaster (Humbucker Neck + Single Coil Bridge)
  • SH Telecaster (Humbucker Bridge + Single Coil Neck)
  • SS Tele® (Two Single coils / traditional Tele® mode)

CRYSTAL CLEAR TONE (Treble Bleed)

Retain clarity at lower volumes. To make your tone crystal clear at lower volumes we include an Obsidian® Custom spec treble bleed mod. This prevents tone 'muddiness' at low volumes by allowing high frequencies to pass along a separate path to your amp, rather than being stopped short by the increasing resistance at the volume control.

SMOOTH CONTROL

Even tone and volume control all the way from zero to ten. Obsidian® tone and volume controls incorporate carefully selected and custom-built components, as well as our own clever mods to smooth out the taper of your tone and volume controls, so you get a more even roll off all the way from zero to 10.

DUAL SC (COIL SPLIT) - UPGRADE OPTION

Turn your humbuckers in to single coils, and back again. To add true versatility to your guitar we build in Obsidian® Dual SC, allowing you to split each of your humbuckers to singlecoils for lower output, more dynamic tones.

Obsidian® Dual SC is built in to your volume controls using push/pull pots, so no extra mods are required to your guitar.
- Requires split coil compatible humbuckers

Spezifikationen

MADE IN HOUSE WITH

  • Potentiometers: Obsidian® Custom CTS® Pots 250K (+/-10%) Solid Shaft 1/4"
  • Capacitors: Vintage Plus // 150 Series Polyester Film 0.047UF - (+/-5%) or True Vintage 52' // Radial Metallized Polyester Film (+/-10 %)
  • Switch: Genuine Oak® 3 Way Switch
  • Jack: Pro-Wired Switchcraft® J11 Mono // OR Pure Tone® Mono Multi-Contact 1/4 in

Mehr Infos

Kompatibilität

BUILT TO FIT

  • Fits: Fender® Telecaster® - Right Hand Guitar Only
  • Fits: Squier® Telecaster®
  • Note: Right Hand Guitar Only // Lefty will work but the volume and tone controls will work with an opposite rotation
  • Pickups: Built for humbuckers, P90s and single coils

MAY FIT

  • Other Telecaster style guitars. Check specs below
  • Mounting screw hole spacing = 148.5mm
  • Minimum Cavity Length = 138mm
  • Minimum Cavity Width = 24mm
  • Minimum Cavity Depth = 35mm

DOES NOT FIT

Does NOT Fit: Thinline telecaster

Installieren

Hilfe zur Installation und andere Ressourcen finden Sie in unserem Info-Hub .

Versand

Wohin wir liefern

Wir liefern derzeit direkt an:

  • Vereinigte Staaten
  • Australien
  • Brasilien
  • Kanada (nur Custom Shop)
  • Hongkong
  • Island
  • Indonesien
  • Isle of Man
  • Malaysia
  • Neuseeland
  • Norwegen
  • Philippinen
  • Saudi-Arabien
  • Südkorea
  • Schweiz
  • Taiwan
  • Vereinigtes Königreich

Für andere Länder – siehe Internationale Händler . Falls Ihr Land nicht aufgeführt ist und sich kein Händler in Ihrer Nähe befindet, kontaktieren Sie uns bitte.

Alle Versandkosten und Lieferoptionen werden an der Kasse berechnet.

Versandkosten und Lieferzeiten

Die Versandkosten und Lieferzeiten werden an der Kasse berechnet und variieren je nach Lieferort und gewähltem Spediteur.

Von wo aus wir versenden

Vereinigte Staaten

Standardbestellungen

Versand aus Michigan, USA

Bitte beachten Sie, dass wir aufgrund der Art der Steuererhebung innerhalb des Bundesstaates Michigan keine Bestellungen über unsere Website innerhalb Michigans versenden können. Wenn Sie in Michigan ansässig sind, wenden Sie sich bitte an einen unserer Händler . Wir entschuldigen uns für die entstandenen Unannehmlichkeiten.

Sonderanfertigungen aus dem Shop

(Pro-Wired™-bestückte Schlagbretter und individuell bestückte Kontrollplatten)

Direktversand aus Christchurch, Neuseeland

Alle ObsidianWire™-bestückten Schlagbretter und individuell angefertigten Kontrollplatten werden auf Bestellung gefertigt und direkt von unserem Standort in Christchurch, Neuseeland, versendet. Die voraussichtliche Fertigungszeit beträgt 1–3 Werktage. Wir informieren Sie, falls es zu Verzögerungen kommt.

Rest der Welt

Direktversand aus Christchurch, Neuseeland

Alle Bestellungen außerhalb der Vereinigten Staaten versenden wir von unserer Werkstatt in Christchurch, Neuseeland.

Steuern und Abgaben

ObsidianWire® übernimmt keine Zölle, Steuern oder Zollabfertigungsgebühren.
Die von Ihrer örtlichen Zollbehörde erhobenen Zölle und Steuern gehen zu Ihren Lasten.
Wenn Sie außerhalb der USA leben, empfehlen wir Ihnen, sich vor der Bestellung bei der Zollbehörde Ihres Landes zu erkundigen, was dies sein könnte.
Wenn Sie Bedenken haben, sollten Sie bei einem Händler in Ihrer Nähe bestellen. 

Internationale Händler

  • Lötfreie Installation

    Super einfach zu installieren und ermöglicht einen lötfreien Tonabnehmerwechsel mit Obsidian ® Plug, Play & Enjoy- Anschlüssen.

  • Profi-Qualität

    Die absolut besten Gitarrenverkabelungs-Upgrades unter Verwendung spezieller Teile und perfektionierter Techniken, um sicherzustellen, dass Ihr Kabelbaum ein Upgrade für Sie und Ihre Gitarre darstellt. Jedes Mal.

  • Größere Funktionalität

    Gitarrenelektronik, die mit Ihren Tonabnehmern eine größere Bandbreite an Klängen liefert, mit mehr Schaltoptionen und dynamischeren Setups, die zu Ihrer Gitarre passen.

  • Verbesserter Klang

    Eine Gitarrenverkabelung, die den vollen Dynamikbereich Ihrer Tonabnehmer ermöglicht und, was ebenso wichtig ist, dabei hilft, einen für Sie passenden Kabelbaum zu finden.