Skip to product information
1 of 5
  • Play video
  • Play video

ObsidianWire®

T4 Custom 250k

Custom 4-Way for Tele®

Regular price
US$119.00
Regular price
Sale price
US$119.00
Shipping calculated at checkout.

Super Easy, Solder-less Install
Key Features:

  • Custom '4-Way' Control Layout
  • Play Pickups in Humbucker Mode (Series)
  • Crystal Clear Tone (Treble Bleed)
  • Smooth Tone Control
  • Fits Fender® Telecaster®
  • Fits Squier® Telecaster® with adjustments
  • Includes Pro-Wired Jack


Option
  • Hurry, only 12 items left in stock!

FAST SHIPPING

5 YEAR WARRANTY

ObsidianWire solderless install logo

Super Easy, Solder-less Install
All Obsidian® Pro-Wired Electronics are super easy to install, and allow for solder-less pickup changes with Obsidian® Plug, Play & Enjoy connectors. 

 

CUSTOM 4 WAY WIRING HARNESS FOR TELECASTER®

Fourth Position = Humbucker Mode ~ Requires Three Wire Neck Pickup Mod


The Obsidian® Custom Telecaster 4-Way wiring harness for adds a tasty fourth switch position to make your Tele scream. The neck and bridge pickups are able to work in series to provide a more powerful humbucker like tone. You can use this position for stronger rhythm and screaming leads.

Your Telecaster will retain all of the traditional switch positions, and the familiar master tone and volume controls. 

CRYSTAL CLEAR TONE (Treble Bleed)

Retain clarity at lower volumes. To make your tone crystal clear at lower volumes we include an Obsidian® Custom spec treble bleed mod. This prevents tone 'muddiness' at low volumes by allowing high frequencies to pass along a separate path to your amp, rather than being stopped short by the increasing resistance at the volume control.

SMOOTH CONTROL

Even tone and volume control all the way from zero to ten. Obsidian® tone and volume controls incorporate carefully selected and custom-built components, as well as our own clever mods to smooth out the taper of your tone and volume controls, so you get a more even roll off all the way from zero to 10.

TELECASTER 4 WAY SWITCH POSITIONS:

1: Neck & Bridge in Series (Humbucking)
2: Neck
3: Neck & Bridge in Parallel (Traditional Tele)
4: Bridge

ObsidianWire 4-Way Telecaster Wiring Harness
Telecaster 4-Way Switch Wiring Harness by ObsidianWire
Obsidian Wire | Custom 4-Way for Tele® | Buy direct from the ObsidianWire Strore
Demo video for the ObsidianWire 4-way wiring harness for Telecaster Video demo of the ObsidianWire 4-way solderless wiring harness for Tele
Custom 4-Way for Tele®

Custom 4-Way Wiring - for SS Telecaster®

The Custom 4-Way for Tele®

  • Custom '4-Way' Control Layout
  • Play Pickups in Humbucker Mode (Series)
  • Crystal Clear Tone (Treble Bleed)
  • Smooth Tone Control
  • Fits Fender® Telecaster®
  • Fits Squier® Telecaster® with adjustments
  • Includes Pro-Wired Jack

Details

Description

ObsidianWire solderless install logo

Super Easy, Solder-less Install
All Obsidian® Pro-Wired Electronics are super easy to install, and allow for solder-less pickup changes with Obsidian® Plug, Play & Enjoy connectors. 

 

CUSTOM 4 WAY WIRING HARNESS FOR TELECASTER®

Fourth Position = Humbucker Mode ~ Requires Three Wire Neck Pickup Mod


The Obsidian® Custom Telecaster 4-Way wiring harness for adds a tasty fourth switch position to make your Tele scream. The neck and bridge pickups are able to work in series to provide a more powerful humbucker like tone. You can use this position for stronger rhythm and screaming leads.

Your Telecaster will retain all of the traditional switch positions, and the familiar master tone and volume controls. 

CRYSTAL CLEAR TONE (Treble Bleed)

Retain clarity at lower volumes. To make your tone crystal clear at lower volumes we include an Obsidian® Custom spec treble bleed mod. This prevents tone 'muddiness' at low volumes by allowing high frequencies to pass along a separate path to your amp, rather than being stopped short by the increasing resistance at the volume control.

SMOOTH CONTROL

Even tone and volume control all the way from zero to ten. Obsidian® tone and volume controls incorporate carefully selected and custom-built components, as well as our own clever mods to smooth out the taper of your tone and volume controls, so you get a more even roll off all the way from zero to 10.

TELECASTER 4 WAY SWITCH POSITIONS:

1: Neck & Bridge in Series (Humbucking)
2: Neck
3: Neck & Bridge in Parallel (Traditional Tele)
4: Bridge

Specs

BUILT IN HOUSE WITH

  • Potentiometers: Obsidian® Custom CTS® Pots 250K (+/-10%) - Solid Shaft 1/4"
  • Capacitors: (150 Series Polyester Film 0.022UF) (+/-5%)
  • Switch: Genuine Oak® 3 Way Switch
  • Jack: Pro-Wired Switchcraft® J11 Mono // OR Pure Tone® Mono Multi-Contact 1/4 in

More Info

Compatibility

MADE TO FIT

  • Fits: Fender® US & MIM Telecaster® - Direct Fit // Right Hand Guitar Only
  • Fits: Fender® Japan Telecaster® - Replace control plate & knobs
  • Fits: Squier® Telecaster® - Replace control plate & knobs
  • Knobs: Requires US Spec 1/4" Solid Shaft Knobs
  • Control Plate: Use Genuine Fender or Obsidian® plate only - Other aftermarket plates will NOT fit
  • Pickups: Built for two single coil pickups. Requires three wire (2x ground & 1x hot) neck pickup or a three wire mod. Wire instructions are provided, but a solder join is required.

DOES NOT FIT

  • Does NOT Fit: Thinline telecaster, or any guitar not specified above

Install

For install help and other resources please go to our Info Hub.

Shipping

Where We Ship To

We are currently shipping direct to:

  • United States
  • Australia
  • Brazil
  • Canada (Custom Shop only)
  • E.U Countries
  • Hong Kong
  • Iceland
  • Indonesia
  • Isle Of Man
  • Malaysia
  • New Zealand
  • Norway
  • Philippines
  • Saudi Arabia
  • South Korea
  • Switzerland
  • Taiwan
  • United Kingdom

For other countries - See International Dealers.
If your country is not listed, and there is no dealer near you, please get in touch with us.

All shipping costs and delivery options are calculated at checkout.

Shipping Costs and Timeframes

Shipping costs and delivery timeframes are calculated at checkout and will vary depending on delivery location and carrier selected.

Where We Ship From

United States

Standard Orders 

Ship from Michigan, USA

Please note that due to the way in-state taxes are collected, we cannot ship website orders within Michigan state. If you are based in Michigan, please get in touch with one of our dealers. Apologies for any inconvenience caused.

Custom Shop Orders

(Pro-Wired™ Loaded Pickguards and Custom Loaded Control Plates)

Ship Direct from Christchurch, New Zealand

All ObsidianWire™ Loaded pickguards and customised control plates are made to order and ship direct from our location in Christchurch, New Zealand. We have an expected build time of 1-3 business days, and will let you know if we expect any delays.

Rest of World

Ship Direct from Christchurch, New Zealand

We ship all orders outside of the United States, from our workshop in Christchurch, New Zealand. 

Taxes and Duties

Import taxes and tariffs are a challenge for many businesses and customers.
To make this easier for you, we cover these on your behalf where possible, however as there are a few exceptions, please check your location on the list below:

U.S.A

There are NO additional taxes, tariffs or duties.

E.U Countries

There are NO additional taxes, tariffs or duties.

Australia

It is our understanding that any order below $1000AUD does not incur import duties.

United Kingdom

High-value orders, such as custom loaded pickguards, will ship via DHL, with VAT/Duties paid.

We do not currently have the ability to pay VAT on smaller economy parcels. This means that orders shipped via NZ Post/Royal Mail may incur duties at your end. 

New Zealand

G.S.T is collected at checkout, no other taxes or duties are charged.

All other locations

To all other locations, there may be duties charged by your local customs agency.

We recommend checking with your country's customs agency what taxes/duties may be incurred by shipments from New Zealand, prior to ordering.

If you are concerned, consider ordering from dealer near you: International Dealers


  • Solderless Install

    Super easy to install, and allow for solder-less pickup changes with Obsidian® Plug, Play & Enjoy connectors.

  • Pro-Grade Quality

    The absolute best guitar wiring upgrades, using custom specified parts and perfected techniques to ensure that your harness will be an upgrade for you and your guitar. Every time.

  • Greater Functionality

    Guitar electronics that will deliver a greater range of sounds from your pickups, with more switching options, and more dynamic setups to suit your guitar.

  • Improved Sound

    Guitar wiring that allows the full dynamic range of your pickups, and just as importantly, help find a harness that is matched to you.